Prerequisites

It is recommended that you familiarise yourself with R first by sitting our Session 1: Introduction to R tutorial

DataSHIELD support

Datashield user support is provided via the DataSHIELD Forum, DataSHIELD user training classes are offered on a fee basis. Please enquire at datashield@newcastle.ac.uk for current prices.

Introduction

This tutorial introduces users R/RStudio users to DataSHIELD commands and syntax. Throughout this document we refer to R, but all commands are run in the same way in Rstudio. This tutorial contains a limited number of examples; further examples are available in each DataSHIELD function manual page that can be accessed via the help function.

The DataSHIELD approach: aggregate and assign functions

DataSHIELD commands call functions that range from carrying out pre-requisite tasks such as login to the data providers, to generating basic descriptive statistics, plots and tabulations. More advance functions allow for users to fit generalized linear models and generalized estimating equations models. R can list all functions available in DataSHIELD.

This section explains the functions we will call during this tutorial. Although this knowledge is not required to run DataSHIELD analyses it helps to understand the output of the commands. It can explain why some commands call functions that return nothing to the user, but rather store the output on the server of the data provider for use in a second function.

In DataSHIELD the person running an analysis (the client) uses client-side functions to issue commands (instructions). These commands initiate the execution (running) of server-side functions that run the analysis server-side (behind the firewall of the data provider). There are two types of server-side function: assign functions and aggregate functions.

How assign and aggregate functions work

Assign functions do not return an output to the client, with the exception of error or status messages. Assign functions create new objects and store them server-side either because the objects are potentially disclosive, or because they consist of the individual-level data which, in DataSHIELD, is never seen by the analyst. These new objects can include:

new transformed variables (e.g. mean centred or log transformed variables)
a new variable of a modified class (e.g. a variable of class numeric may be converted into a factor which R can then model as having discrete categorical levels)
a subset object (e.g. a table may be split into males and females).
Assign functions return no output to the client except to indicate an error or useful messages about the object store on
server-side.

Aggregate functionsanalyse the data server-side and return an output in the form of aggregate data (summary statistics that are not disclosive) to the client. The help page for each function tells us what is returned and when not to expect an output on client-side.

Starting and Logging onto the Opal Training Servers

Follow the instructions depending on your training environment:

Logging onto the DataSHIELD cloud training environment (training VMs used in DataSHIELD training classes)
Logging onto the Local DataSHIELD training VMs (installed locally on your computer)

DataSHIELD Cloud Training Environment

Start the Opal Servers

Your trainer will have started your Opal training servers in the cloud for you.

Logging into the DataSHIELD Client Portal

Your trainer will give you the IP address of the DataSHIELD client portal ending :8787

They will also provide you with a username and password to login with.

Build your login dataframe

DataSHIELD cloud IP addresses

The DataSHIELD cloud training environment does not use fixed IP addresses, the client and opal training server addresses change each training session. As part of the user tutorial you learn how to build a DataSHIELD login dataframe. In a real world instance of DataSHIELD this is populated with secure certificates not text based usernames and passwords.

In your DataSHIELD client R studio home directory you will have a login script similar to the template below. Double click to open it up in the top left window.
Highlight the the login script and run it by pressing Ctrl+Enter

Build your login dataframe

server <- c("ds-training-server1", "ds-training-server2") #The server names
url <- c("http://XXX.XXX.XXX.XXX:8080", "http://XXX.XXX.XXX.XXX:8080") # These IP addresses change
user <- "administrator" 
password <- "datashield_test&"
table <- c("CNSIM.CNSIM1","CNSIM.CNSIM2") #The data tables used in the tutorial
my_logindata <- data.frame(server,url,user,password,table)

check the login dataframe

my_logindata

Local Training VMs

Start the Opal Servers

Start your Opal Training VMs.

Build your login dataframe

Login dataframe

As part of the user tutorial you learn how to build a DataSHIELD login dataframe. In a real world instance of DataSHIELD this is populated with secure certificates not text based usernames and passwords.

Open R/Rstudio and create your login data frame "my_logindata" for use with the Opal Training VMs.

Build your login dataframe

server <- c("dstesting-100", "dstesting-101") #The VM names
url <- c("http://192.168.56.100:8080", "http://192.168.56.101:8080") # The fixed IP addresses of the training VMs
user <- "administrator" 
password <- "datashield_test&"
table <- c("CNSIM.CNSIM1","CNSIM.CNSIM2") #The data tables used in the tutorial
my_logindata <- data.frame(server,url,user,password,table)

check the login dataframe

my_logindata

Start R/RStudio and load packages

The following relevant R packages are required for analysis

opal to login and logout

dsBaseClient , dsStatsClient , ds.GraphicsClient and dsModellingClient containing all DataSHIELD functions referred to in this tutorial.

To load the R packages, type the library function into the command line as given in the example below:

#load libraries
library(opal)
library(dsBaseClient)
library(dsStatsClient)
library(dsGraphicsClient)
library(dsModellingClient)

The output in R/RStudio will look as follows:

library(opal)
#Loading required package: RCurl
#Loading required package: bitops
#Loading required package: rjson
library(dsBaseClient)
#Loading required package: fields
#Loading required package: spam
#Loading required package: grid
library(dsStatsClient)
library(dsGraphicsClient)
library(dsModellingClient)

You might see the following status message that you can ignore. The message refers to the blocking of functions within the package.The following objects are masked from ‘package:xxxx’

Log onto the remote Opal training servers

Create a variable called opals that calls the datashield.login function to log into the desired Opal servers. In the DataSHIELD test environment logindata is our login template for the test Opal servers.

opals <- datashield.login(logins=my_logindata,assign=TRUE)

The output below indicates that each of the two Opal training servers study1 and study2 contain the same 11 variables listed in capital letters under Variables assigned: .

opals <- datashield.login(logins=my_logindata,assign=TRUE)
# Logging into the collaborating servers

#  No variables have been specified.
#  All the variables in the opal table
#  (the whole dataset) will be assigned to R!

# Assigining data:
# study1...
# study2...

# Variables assigned:
# study1--LAB_TSC, LAB_TRIG, LAB_HDL, LAB_GLUC_ADJUSTED, PM_BMI_CONTINUOUS, DIS_CVA, MEDI_LPD, DIS_DIAB, DIS_AMI, GENDER, PM_BMI_CATEGORICAL
# study2--LAB_TSC, LAB_TRIG, LAB_HDL, LAB_GLUC_ADJUSTED, PM_BMI_CONTINUOUS, DIS_CVA, MEDI_LPD, DIS_DIAB, DIS_AMI, GENDER, PM_BMI_CATEGORICAL

In Horizontal DataSHIELD pooled analysis the data are harmonized and the variables given the same names across the studies, as agreed by all data providers.

How datashield.login works

The datashield.login function from the R package opal allows users to login and assign data to analyse from the Opal server in a server-side R session created behind the firewall of the data provider.

All the commands sent after login are processed within the server-side R instance only allows a specific set of commands to run (see the details of a typical horizontal DataSHIELD process). The server-side R session is wiped after loging out.

If we do not specify individual variables to assign to the server-side R session, all variables held in the Opal servers are assigned. Assigned data are kept in a data frame named D by default. Each column of that data frame represents one variable and the rows are the individual records.

Assign individual variables on login

Users can specify individual variables to assign to the server-side R session. It is best practice to first create a list of the Opal variables you want to analyse.

The example below creates a new variable myvar that lists the Opal variables required for analysis: LAB_HDL and GENDER
The variables argument in the function datashield.login uses myvar, which then will call only this list.

myvar <- list('LAB_HDL', 'GENDER')
opals <- datashield.login(logins=my_logindata,assign=TRUE,variables=myvar)

#Logging into the collaborating servers

#Assigining data:
#study1...
#study2...

#Variables assigned:
#study1--LAB_HDL, GENDER
#study2--LAB_HDL, GENDER

The format of assigned data frames

Assigned data are kept in a data frame (table) named D by default. Each row of the data frame are the individual records and each column is a separate variable.

The example below uses the argument symbol in the datashield.login function to change the name of the data frame from D to mytable.

myvar <- list('LAB_HDL', 'GENDER')
opals <- datashield.login(logins=my_logindata,assign=TRUE,variables=myvar, symbol='mytable')

#Logging into the collaborating servers

#Assigining data:
#study1...
#study2...

#Variables assigned:
#study1--LAB_HDL, GENDER
#study2--LAB_HDL, GENDER

Only DataSHIELD developers will need to change the default value of the last argument, directory , of the datashield.login function.

Basic statistics and data manipulations

Descriptive statistics: variable dimensions and class

Almost all functions in DataSHIELD can display split results (results separated for each study) or pooled results (results for all the studies combined). This can be done using the type='split' and type='combine' argument in each function. The majority of DataSHIELD functions have a default of type='combined'. The default for each function can be checked in the function help page.

It is possible to get some descriptive or exploratory statistics about the assigned variables held in the server-side R session such as number of participants at each data provider, number of participants across all data providers and number of variables. Identifying parameters of the data will facilitate your analysis.

The dimensions of the assigned data frame D can be found using the ds.dim command in which type='split' is the default argument:

opals <- datashield.login(logins=my_logindata,assign=TRUE)
ds.dim(x='D')

The output of the command is shown below. It shows that in study1 there are 2163 individuals with 11 variables and in study2 there are 3088 individuals with 11 variables:

> opals <- datashield.login(logins=my_logindata,assign=TRUE)
Logging into the collaborating servers
  No variables have been specified. 
  All the variables in the opal table 
  (the whole dataset) will be assigned to R!
Assigning data:
study1...
study2...
Variables assigned:
study1--LAB_TSC, LAB_TRIG, LAB_HDL, LAB_GLUC_ADJUSTED, PM_BMI_CONTINUOUS, DIS_CVA, MEDI_LPD, DIS_DIAB, DIS_AMI, GENDER, PM_BMI_CATEGORICAL
study2--LAB_TSC, LAB_TRIG, LAB_HDL, LAB_GLUC_ADJUSTED, PM_BMI_CONTINUOUS, DIS_CVA, MEDI_LPD, DIS_DIAB, DIS_AMI, GENDER, PM_BMI_CATEGORICAL


> ds.dim(x='D')
$study1
[1] 2163   11

$study2
[1] 3088   11

Use the type='combine' argument in the ds.dim function to identify the number of individuals (5251) and variables (11) pooled across all studies:

ds.dim('D', type='combine')
#$pooled.dimension
#[1] 5251   11

To check the variables in each study are identical (as is required for pooled data analysis), use the ds.colnames function on the assigned data frame D:

ds.colnames(x='D')
#$study1
# [1] "LAB_TSC"            "LAB_TRIG"           "LAB_HDL"            "LAB_GLUC_ADJUSTED"  "PM_BMI_CONTINUOUS"  "DIS_CVA"
# [7] "MEDI_LPD"           "DIS_DIAB"           "DIS_AMI"            "GENDER"             "PM_BMI_CATEGORICAL"

#$study2
# [1] "LAB_TSC"            "LAB_TRIG"           "LAB_HDL"            "LAB_GLUC_ADJUSTED"  "PM_BMI_CONTINUOUS"  "DIS_CVA"
# [7] "MEDI_LPD"           "DIS_DIAB"           "DIS_AMI"            "GENDER"             "PM_BMI_CATEGORICAL"

Use the ds.class function to identify the class (type) of a variable - for example if it is an integer, character, factor etc. This will determine what analysis you can run using this variable class. The example below defines the class of the variable LAB_HDL held in the assigned data frame D, denoted by the argument x='D$LAB_HDL'

ds.class(x='D$LAB_HDL')
#$study1
#[1] "numeric"

#$study2
#[1] "numeric"

Descriptive statistics: quantiles and mean

As LAB_HDL is a numeric variable the distribution of the data can be explored.

The function ds.quantileMean returns the quantiles and the statistical mean. It does not return minimum and maximum values as these values are potentially disclosive (e.g. the presence of an outlier). By default type='combined' in this function - the results reflect the quantiles and mean pooled for all studies. Specifying the argument type='split' will give the quantiles and mean for each study:

ds.quantileMean(x='D$LAB_HDL')
# Quantiles of the pooled data
#       5%      10%      25%      50%      75%      90%      95%     Mean 
# 1.042161 1.257601 1.570058 1.901810 2.230529 2.521782 2.687495 1.561957

To get the statistical mean alone, use the function ds.mean use the argument type to request split results:

ds.mean(x='D$LAB_HDL')
#$`Global mean`
#[1] 1.561957

Descriptive statistics: assigning variables

So far all the functions in this section have returned something to the screen. Some functions (assign functions) create new objects in the server-side R session that are required for analysis but do not return an anything to the client screen. For example, in analysis the log values of a variable may be required.

By default the function ds.log computes the natural logarithm. It is possible to compute a different logarithm by setting the argument base to a different value. There is no output to screen:

ds.log(x='D$LAB_HDL')

In the above example the name of the new object was not specified. By default the name of the new variable is set to the input vector followed by the suffix '_log' (i.e. 'LAB_HDL_log')

It is possible to customise the name of the new object by using the newobj argument:

ds.log(x='D$LAB_HDL', newobj='LAB_HDL_log')

The new object is not attached to assigned variables data frame (default name D). We can check the size of the new LAB_HDL_log vector we generated above; the command should return the same figure as the number of rows in the data frame 'D'.

ds.length (x='LAB_HDL_log')
#$total.number.of.observations
#[1] 5251
ds.length(x='D$LAB_HDL')
#$total.number.of.observations
#[1] 5251

ds.assign

The ds.assign function enables the creation of new objects in the server-side R session to be used in later analysis. ds.assign can be used to evaluate simple expressions passed on to its argument toAssign and assign the output of the evaluation to a new object.

Using ds.assignwe subtract the pooled mean calculated earlier from LAB_HDL (mean centring) and assign the output to a new variable called LAB_HDL.c. The function returns no output to the client screen, the newly created variable is stored server-side.

ds.assign(toAssign='D$LAB_HDL-1.562', newobj='LAB_HDL.c')

Further DataSHIELD functions can now be run on this new mean-centred variable LAB_HDL.c. The example below calculates the mean of the new variable LAB_HDL.c which should be approximately 0.

ds.mean(x='LAB_HDL.c')
#$`Global mean`
#[1] -4.280051e-05

Generating contingency tables

The function ds.table1D creates a one-dimensional contingency table of a categorical variable. The default is set to run on pooled data from all studies, to obtain an output of each study set the argument type='split'.

The example below calculates a one-dimensional table for the variable GENDER. The function returns the counts and the column and row percent per category, as well as information about the validity of the variable in each study dataset:

ds.table1D(x='D$GENDER')
# $counts
#       D$GENDER
# 0         2677
# 1         2574
# Total     5251
# $percentages
#       D$GENDER
# 0        50.98
# 1        49.02
# Total   100.00
# $validity
# [1] "All tables are valid!"

In DataSHIELD tabulated data are flagged as invalid if one or more cells have a count of between 1 and the minimal cell count allowed by the data providers. For example data providers may only allow cell counts ≥ 5).

The function ds.table2D creates two-dimensional contingency tables of a categorical variable. Similar to ds.table1D the default is set to run on pooled data from all studies, to obtain an output of each study set the argument *type='split'.

The example below constructs a two-dimensional table comprising cross-tabulation of the variables DIS_DIAB (diabetes status) and GENDER. The function returns the same output as ds.table1D but additionally computes a chi-squared test for homogeneity on (nc-1)*(nr-1) degrees of freedom (where nc is the number of columns and nr is the number of rows):

ds.table2D(x='D$DIS_DIAB', y='D$GENDER')
# $counts
# $counts$`pooled-D$DIS_DIAB(row)|D$GENDER(col)`
#          0    1 Total
# 0     2625 2549  5174
# 1       52   25    77
# Total 2677 2574  5251

# $rowPercent
# $rowPercent$`pooled-D$DIS_DIAB(row)|D$GENDER(col)`
#           0     1 Total
# 0     50.73 49.27   100
# 1     67.53 32.47   100
# Total 50.98 49.02   100

# $colPercent
# $colPercent$`pooled-D$DIS_DIAB(row)|D$GENDER(col)`
#            0      1  Total
# 0      98.06  99.03  98.53
# 1       1.94   0.97   1.47
# Total 100.00 100.00 100.00

# $chi2Test
# $chi2Test$`pooled-D$DIS_DIAB(row)|D$GENDER(col)`
# 	Pearson's Chi-squared test with Yates' continuity correction
# data:  pooledContingencyTable
# X-squared = 7.9078, df = 1, p-value = 0.004922
# $validity
# [1] "All tables are valid!"

Generating graphs

It is currently possible to produce 3 types of graphs in DataSHIELD:

Graphical restrictions

Scatter plots are not possible in DataSHIELD because they display individual data points and are hence potentially disclosive. Instead it is possible to draw a contour plot or a heatmap plot if the aim is to visualise a correlation pattern.

Histograms

In DataSHIELD histogram outliers are not shown as these are potentially disclosive. The text summary of the function printed to the client screen informs the user of the presence of classes (bins) with a count smaller than the minimal cell count set by data providers.

The ds.histogram function can be used to create a histogram of LAB_HDL that is in the assigned variable dataframe (named D, by default). The default analysis is set to run on pooled data from all studies:

ds.histogram(x='D$LAB_HDL')

To produce histograms from each study, the argument type='split' is used. Note that some study 1 and study 2 contain 1 invalid category (bin) respectively - they contain counts less than the data provider minimal cell count:

ds.histogram(x='D$LAB_HDL', type='split')
#Warning: study1: 1 invalid cells
#Warning: study2: 1 invalid cells

Contour plots

Contour plots are used to visualize a correlation pattern that would traditionally be determined using a scatter plot (which can not be used in DataSHIELD as it is potentially disclosive).

The function ds.contourPlot is used to visualise the correlation between the variables LAB_TSC (total serum cholesterol and LAB_HDL (HDL cholesterol). The default is type='combined' - the results represent a contour plot on pooled data across all studies:

ds.contourPlot(x='D$LAB_TSC', y='D$LAB_HDL')
#study1: Number of invalid cells (cells with counts >0 and <5) is 83
#study2: Number of invalid cells (cells with counts >0 and <5) is 97

Heat map plots

An alternative way to visualise correlation between variables is via a heat map plot.

The function ds.heatmapPlot is applied to the variables LAB_TSC and LAB_HDL:

ds.heatmapPlot(x='D$LAB_TSC', y='D$LAB_HDL')
#study1: Number of invalid cells (cells with counts >0 and <5) is 92
#study2: Number of invalid cells (cells with counts >0 and <5) is 93

The functions ds.contourPlot and ds.heatmapPlot use the range (mimumum and maximum values) of the x and y vectors in the process of generating the graph. But in DataSHIELD the minimum and maximum values cannot be returned because they are potentially disclosive; hence what is actually returned for these plots is the 'obscured' minimum and maximum. As a consequence the number of invalid cells, in the grid density matrix used for the plot, reported after running the functions can change slightly from one run to another. In the above output for example the number of invalid cells are respectively 83 and 97 for study1 and study2. These figures can change if the command is ran again but we should not be alarmed by this as it does not affect the plot itself. It was a deliberate decision to ensure the real minimum and maximum values are not returned.

Saving Graphs / Plots in R Studio

Any plots will appear in the bottom right window in R Studio, within the plot tab
Select export > save as image

Name the file and select / create a folder to store the image in on the DataSHIELD Client server.
You can also edit the width and height of the graph

The plot will now be accessible from your Home folder directory structure. On a live DataSHIELD system you can then transfer the plot to your computer via secure file transfer (sftp).

Sub-setting

Limitations on subsetting

Sub-setting is particularly useful in statistical analyses to break down variables or tables of variables into groups for analysis. Repeated sub-setting, however, can lead to thinning of the data to individual-level records that are disclosive (e.g. the statistical mean of a single value point is the value itself). Therefore, DataSHIELD does not subset an object below the minimal cell count set by the data providers (typically this is ≤ 4 observations).

In DataSHIELD there are currently 3 functions that allow us to generate subsets data:

Sub-setting using ds.subsetByClass

The ds.subsetByClass function generates subsets for each level of a categorical variable. If the input is a data frame it produces a subset of that data frame for each class of each categorical variable held in the data frame.
Best practice is to state the categorical variable(s) to subset using the variables argument, and the name of the subset data using the subsets argument.
The example subsets GENDER from our assigned data frame D, the subset data is named GenderTables:

ds.subsetByClass(x = 'D', subsets = "GenderTables", variables = 'GENDER')

The output of ds.subsetByClass is held in a list object stored server-side, as the subset data contain individual-level records. If no name is specified in the subsets argument, the default name of subClasses is used.

Running ds.subsetByClass on a data frame without specifying the categorical variable in the argument variableswill create a subset of all categorical variables. If the data frame holds many categorical variables the number of subsets produces might be too large - many of which may not be of interest for the analysis.

Sub-setting using ds.names

In the previous example, the GENDER variable in assigned data frame D had females coded as 0 and males coded as 1. When GENDER was subset using the ds.subsetByClass function, two subset tables were generated for each study dataset
one for females and one for males.

The ds.names function obtains the names of these subset data:

ds.names('GenderTables')
#$study1
#[1] "GENDER.level_0" "GENDER.level_1"

#$study2
#[1] "GENDER.level_0" "GENDER.level_1"

Sub-setting using ds.meanByClass

The ds.meanByClass function generates subset tables similar to ds.subsetByClass but additionally calculates the mean, standard deviation and size for each subset for specific numeric variables.

The ds.meanByClass function returns the mean, standard deviation and size of the variable defined in the outvar argument for each subset data defined in the covar argument.
The example below shows LAB_HDL (cholesterol) for the subset data GENDER (females and males) the default in the function is type='combined' (pooled across all studies). To get each study separately the argument type='split' must be used:

ds.meanByClass(x='D', outvar='LAB_HDL', covar='GENDER')
#Generating the required subset tables (this may take couple of minutes, please do not interrupt!)
#--study1
#  GENDER...
#--study2
#  GENDER...
#LAB_HDL - Processing subset table 1 of 2...
#LAB_HDL - Processing subset table 2 of 2...
#                 D.GENDER0    D.GENDER1
#LAB_HDL(length)  "2677"       "2574"
#LAB_HDL(mean&sd) "1.51(0.44)" "1.62(0.4)"

The outvar argument can be a vector of several numeric variables that the size, mean and sd is calculated for. But the number of categorical variables in the argument covar is limited to 3. This, because beyond that limit continuous sub-setting may lead to tables that hold a number of observation lower than the minimum cell count set by the data providers.

Sub-setting using ds.subset

The function ds.subset allows general sub-setting of different data types e.g. categorical, numeric, character, data frame, matrix. It is also possible to subset rows (the individual records). No output is returned to the client screen, the generated subsets are stored in the server-side R session.

The example below uses the function ds.subset to subset the assigned data frame D by rows (individual records) that have no missing values (missing values are denoted with NA) given by the argument completeCases=TRUE. The output subset is named D_without_NA:

ds.subset(x='D', subset='D_wihthout_NA', completeCases=TRUE)
#In order to indicate that a generated subset dataframe or vector is invalid all values within it are set to NA!

The ds.subset function always prints an invalid message to the client screen to inform if missing values exist in a subset. An invalid message also denotes subsets that contain less than the minimum cell count determined by data providers.

The second example creates a subset of the assigned data frame D with BMI values ≥ 25 using the argument logicalOperator. The subset object is named BMI25plus using the subset argument and is not printed to client screen but is stored in the server-side R session:

ds.subset(x='D', subset='BMI25plus', logicalOperator='PM_BMI_CONTINUOUS>=', threshold=25)
#In order to indicate that a generated subset dataframe or vector is invalid all values within it are set to NA!

The subset of data retains the same variables names i.e. column names

To verify the subset above is correct (holds only observations with BMI ≥ 25) the function ds.quantileMean with the argument type='split' will confirm the BMI results for each study are ≥ 25.

ds.quantileMean('BMI25plus$PM_BMI_CONTINUOUS', type='split')
# $study1
#      5%     10%     25%     50%     75%     90%     95%    Mean 
# 25.3500 25.7100 27.1500 29.2000 32.0600 34.6560 36.4980 29.9019 
# $study2
#       5%      10%      25%      50%      75%      90%      95%     Mean 
# 25.46900 25.91800 27.19000 29.27000 32.20500 34.76200 36.24300 29.92606

Also a histogram of the variable BMI of the new subset data frame could be created for each study separately:

ds.histogram('BMI25plus$PM_BMI_CONTINUOUS')

Modelling

Horizontal DataSHIELD allows the fitting of:

generalised linear models (GLM)

In GLM function the outcome can be modelled as continuous, or categorical (binomial or discrete). The error to use in the model can follow a range of distribution including gaussian, binomial, Gamma and poisson. In this section only one example will be shown, for more examples please see the manual help page for the function.

Generalised linear models

The function ds.glm is used to analyse the outcome variable DIS_DIAB (diabetes status) and the covariates PM_BMI_CONTINUOUS(continuous BMI), LAB_HDL (HDL cholesterol) and GENDER (gender), with an interaction between the latter two. In R this model is represented as
```
D$DIS_DIAB ~ D$PM_BMI_CONTINUOUS+D$LAB_HDL*D$GENDER
```
By default intermediate results are not printed to the client screen. It is possible to display the intermediate results, to show the coefficients after each iteration, by using the argument display=TRUE.

ds.glm(formula=D$DIS_DIAB~D$PM_BMI_CONTINUOUS+D$LAB_HDL*D$GENDER, family='binomial')
#Iteration 1...
#CURRENT DEVIANCE:      5772.52971970323
#Iteration 2...
#CURRENT DEVIANCE:      1316.4695853419
....
#SUMMARY OF MODEL STATE after iteration 9
#Current deviance 534.369101004808 on 4159 degrees of freedom
#Convergence criterion TRUE (1.38346480863211e-12)
#beta: -6.90641416691308 0.142256253558181 -0.96744073975236 -1.40945273343361 0.646007073975006
#Information matrix overall:
#                  (Intercept) PM_BMI_CONTINUOUS    LAB_HDL   GENDER1
#(Intercept)          52.47803         1624.8945   71.78440  16.77192
#PM_BMI_CONTINUOUS  1624.89450        51515.6450 2204.90085 503.20484
#LAB_HDL              71.78440         2204.9008  109.48855  25.91140
#GENDER1              16.77192          503.2048   25.91140  16.77192
#LAB_HDL:GENDER1      25.91140          774.1803   42.87626  25.91140
#                  LAB_HDL:GENDER1
#(Intercept)              25.91140
#PM_BMI_CONTINUOUS       774.18028
#LAB_HDL                  42.87626
#GENDER1                  25.91140
#LAB_HDL:GENDER1          42.87626
#Score vector overall:
#                           [,1]
#(Intercept)       -3.610710e-10
#PM_BMI_CONTINUOUS -9.867819e-09
#LAB_HDL           -6.308052e-10
#GENDER1           -2.910556e-10
#LAB_HDL:GENDER1   -5.339693e-10
#Current deviance: 534.369101004808
#$formula
#[1] "D$DIS_DIAB ~ D$PM_BMI_CONTINUOUS + D$LAB_HDL * D$GENDER"
#$family
#Family: binomial 
#Link function: logit 
#
#$coefficients
#                    Estimate Std. Error    z-value      p-value low0.95CI.LP
#(Intercept)       -6.9064142 1.08980103 -6.3373166 2.338013e-10  -9.04238494
#PM_BMI_CONTINUOUS  0.1422563 0.02932171  4.8515676 1.224894e-06   0.08478676
#LAB_HDL           -0.9674407 0.36306348 -2.6646601 7.706618e-03  -1.67903208
#GENDER1           -1.4094527 1.06921103 -1.3182175 1.874308e-01  -3.50506784
#LAB_HDL:GENDER1    0.6460071 0.69410419  0.9307062 3.520056e-01  -0.71441214
#                  high0.95CI.LP       P_OR low0.95CI.P_OR high0.95CI.P_OR
#(Intercept)          -4.7704434 0.00100034   0.0001182744     0.008405372
#PM_BMI_CONTINUOUS     0.1997257 1.15287204   1.0884849336     1.221067831
#LAB_HDL              -0.2558494 0.38005445   0.1865544594     0.774258560
#GENDER1               0.6861624 0.24427693   0.0300447352     1.986079051
#LAB_HDL:GENDER1       2.0064263 1.90790747   0.4894797709     7.436693232
#$dev
#[1] 534.3691
#$df
#[1] 4159
#$nsubs
#[1] 4164
#$iter
#[1] 9
#attr(,"class")
#[1] "glmds"

How ds.glm works

After every iteration in the glm, each study returns non disclosive summaries (a score vector and an information matrix) that are combined on the client R session. The model is fitted again with the updated beta coefficients, this iterative process continues until convergence or the maximum number of iterations is reached. The output of ds.glm returns the final pooled score vector and information along with some information about the convergence and the final pooled beta coefficients.

You have now sat our basic DataSHIELD training. Remember you can:

get a function list for any DataSHIELD package and
view the manual help page individual functions
in the DataSHIELD test environment it is possible to print analyses to file (.csv, .txt, .pdf, .png)
take a look at our FAQ page for solutions to common problems such as Changing variable class to use in a specific DataSHIELD function.